Beginner Skimboarding Tricks: What to Learn First

Which skimboarding tricks beginners should learn first and in what order, plus how to run a relaxed, safe seaside skim session with games for every age.

11 min readSkimboarding6 viewsBeginner Skimboarding Tricks: What to Learn First
— · 0 votes
Contents
  1. What should a beginner learn first in skimboarding?
  2. The foundation: run, drop and glide
  3. How to do the run, drop and glide
  4. Foot placement and stance
  5. Balance and falling safely
  6. The first tricks, in order
  7. Carving turns
  8. 180 spin
  9. 360 spin
  10. Shove-it
  11. Body varial
  12. Who a beginner skim session suits
  13. What to bring for a skimboarding get-together
  14. How to organise the group
  15. Games for a beginner skim session
  16. Longest glide
  17. S-K-I-M
  18. Follow the leader
  19. Style judges
  20. Adapting skimboarding for different ages and abilities
  21. Alternatives for limited space, equipment or changing weather
  22. Limited space
  23. Limited equipment
  24. Changing weather and conditions
  25. Beach safety and respect for other visitors

The first skimboarding tricks to learn are a clean run, drop and glide, then carving turns, then a 180 spin and a 360 spin on the board, and only after that a shove-it and a body varial. Each step builds the balance, foot placement and controlled landings the next trick needs. Most beginners learn these on flatland, in the thin sheet of water a wave leaves on the sand, so the progression works well as a relaxed seaside get-together where friends take turns, cheer each other on and play simple games between runs.

What should a beginner learn first in skimboarding?

A beginner should learn to glide in a straight line before trying any trick. Skimboarding tricks for beginners depend on a steady, centred stance on a moving board. If the basic glide is shaky, spins and jumps turn into falls.

A sensible learning order looks like this:

  1. Run, drop and glide: drop the board, step on and ride straight until the board slows down.
  2. Carving turns: lean on your toes or heels to curve left and right.
  3. 180 spin: rotate yourself and the board half a turn together while gliding.
  4. 360 spin: the same movement extended to a full rotation.
  5. Shove-it: make a small hop while the board rotates 180 degrees under you.
  6. Body varial: jump and turn your body 180 degrees while the board keeps going straight.

Tricks such as ollies and wave riding come later, once these feel reliable.

The foundation: run, drop and glide

The run, drop and glide is the basic skimboarding movement. You run alongside the water's edge holding the board, drop it flat onto the thin water and step onto it while still moving. Every flatland skimboarding trick starts from this glide.

How to do the run, drop and glide

  1. Hold the board at waist height by its back edge, with your fingers underneath and your thumb on top.
  2. Wait for a wave to wash up and start draining back, leaving a thin film of water on firm sand.
  3. Run a few steps, bend forward and drop the board flat in front of you. Do not throw it down at an angle, because it will dig in and stop.
  4. Take one or two more steps and place your back foot, then your front foot, onto the board without stamping.
  5. Bend your knees, keep your arms relaxed and look ahead, not down at your feet.

Foot placement and stance

Good foot placement on a skimboard means feet roughly shoulder-width apart, sideways across the board, with your weight centred between them. The front foot sits slightly ahead of the middle of the board and the back foot slightly behind it. Too much weight on the front makes the nose dig in. Too much on the back makes the board shoot out from under you. Riders who lead with the left foot ride regular and those who lead with the right ride goofy. Try both on the sand to see which feels natural.

Balance and falling safely

Balance on a skimboard comes from bent knees and a low centre of gravity, not stiff legs. Everyone falls, so practise falling well from the first session: step off the board instead of riding it into a fall, and try not to land on stiff, outstretched arms, which is a common way to hurt a wrist. The classic beginner fall is the board shooting forward and the rider landing on their backside. Keeping your weight over the middle of the board prevents most of these.

The first tricks, in order

Once a rider can glide straight for a few seconds, the first tricks are about controlling the board while it moves: turning it, rotating with it and then letting it rotate on its own.

Carving turns

A carving turn is a curved line made by leaning the board onto one edge. Lean gently onto your toes for a toeside turn and onto your heels for a heelside turn. Turns teach you how the board reacts to small weight shifts, and that control is behind every spin. Start with wide, gentle curves and avoid sharp leans while the board is slow.

180 spin

A 180 spin is a half rotation where you and the board turn together while gliding, so you end up riding backwards (called fakie). Begin the glide, turn your shoulders and head in the direction you want to spin and let your hips and the board follow. Keep the board flat on the water, because tilting it onto an edge stops the spin. This is usually the first trick that feels like a real trick.

360 spin

A 360 spin is a full rotation of rider and board on the water. It uses the same movement as the 180, with a stronger shoulder turn and a faster, flatter glide so the board has enough speed to finish the circle. Spotting a fixed point on the shore can help you keep your balance as you come round.

Shove-it

A shove-it is a trick where the rider hops up and the board rotates 180 degrees underneath before the rider lands back on it. Push the tail of the board round with your back foot as you make a small jump, then land with bent knees and feet over the middle of the board. Controlled landings matter more than height: a low hop with a clean landing is the goal.

Body varial

A body varial is the opposite of a shove-it: the board keeps going straight while the rider jumps and turns their body 180 degrees in the air. You land facing the other way with your feet swapped. Jump straight up rather than forward, so the board stays beneath you.

TrickWhat movesMain skill it buildsReady to try it when you can
Run, drop and glideRider steps onto a moving boardTiming and centred stanceRun comfortably on wet sand
Carving turnsBoard leans onto an edgeWeight controlGlide straight without wobbling
180 spinRider and board turn half a rotationShoulder-led rotationTurn both ways in control
360 spinRider and board turn a full rotationSpeed and balance while rotatingLand the 180 consistently
Shove-itBoard rotates under a hopping riderFoot control and landingsHop on a gliding board and land on it
Body varialRider rotates, board goes straightAir awarenessLand the shove-it reliably

Who a beginner skim session suits

A beginner skimboarding session suits anyone who can run steadily on wet sand and is happy to fall over and get a bit wet. It works for families, groups of friends, older children and teenagers, and adults trying something new. No swimming in deep water is involved in flatland skimboarding, though everyone should still be comfortable near the sea. It is less suitable for anyone with joint or back problems who should avoid falls, but they can still join in as timekeepers, judges or photographers.

What to bring for a skimboarding get-together

A skim session needs little kit, but a few items make it smoother and safer:

  • Boards: wooden boards are the usual choice for flatland and are durable for sharing. Foam or fibreglass boards are lighter and aimed more at wave riding. One board per two or three people is workable with a rotation.
  • Grip: surf wax or traction pads on the top of the board so feet do not slip.
  • Clothing: swimwear or board shorts and a rash vest to protect against scrapes and sun.
  • Sun and comfort: sunscreen, hats, plenty of drinking water, snacks and towels.
  • First aid: a small kit with plasters and antiseptic wipes for grazes and shell cuts.
  • Markers: a few small cones, flags or brightly coloured items to mark lanes and finish lines.
  • Extras: a phone to film runs, a bag for rubbish, and a windbreak or shade for the base camp.

How to organise the group

The easiest way to organise a skim group is to set up one base camp, one riding lane and a simple turn-taking order. Clear lanes keep riders from colliding and keep other beachgoers out of the way.

  1. Pick the spot and time: choose a wide, gently sloping beach with firm sand and check the tide times. A falling or low tide often gives the longest flat stretches.
  2. Check the beach: walk the riding area and look for rocks, shells, holes, glass or sudden drops.
  3. Set up a base camp: put bags and shade well above the waterline, away from the riding lane.
  4. Mark a lane: place markers for a start point and a run-out zone parallel to the water, away from swimmers and walkers.
  5. Warm up and demonstrate: do a few minutes of light jogging and leg swings, then let the most experienced person show stance and the drop.
  6. Rotate riders: one rider goes per wave, the next waits at the start, and others watch and give tips.
  7. Take breaks: stop for water and shade regularly. Skimboarding involves a lot of running and it is tiring.

Games for a beginner skim session

Simple games keep a mixed group engaged and give beginners a reason to practise the basics without pressure.

Longest glide

Longest glide is a distance game. Each rider does a run, drop and glide from the start marker, and someone places a marker where the board stops or the rider steps off. The furthest marker after three attempts wins. It rewards a smooth drop and good balance more than raw speed.

S-K-I-M

S-K-I-M works like the skateboard game H-O-R-S-E. The first rider sets a challenge, such as a toeside turn or a 180 spin. If they land it, everyone else has to copy it. Anyone who misses gets a letter, and spelling S-K-I-M puts you out. Agree in advance which tricks are allowed so beginners are not handed impossible challenges.

Follow the leader

In follow the leader, one rider does a simple move, for example a glide with a crouch or a gentle heelside turn, and the next rider tries to copy it. The role of leader rotates each round. It works well for younger children because there is no scoring.

Style judges

Non-riders can act as judges and give each run a score out of five for style, smoothness or the best fall of the day. This keeps people who prefer the sand involved.

Adapting skimboarding for different ages and abilities

Skimboarding adapts easily if each rider has a goal that matches their level.

  • Young children: use a smaller, lighter board and let them start by kneeling or sitting on it while an adult gives a gentle push along the wet sand. Keep an adult beside them at the water's edge at all times.
  • Older children and teenagers: focus on the glide and turns, then introduce the 180 spin as a challenge. Games like S-K-I-M suit this age well.
  • Adult beginners: start with slower runs and shorter glides, and pay attention to falling safely. Confidence often matters more than fitness.
  • Riders with some experience: give them the shove-it and body varial as goals, or ask them to coach the beginners.
  • Anyone not riding: timekeeping, marker placing, filming and judging all count as joining in.

Alternatives for limited space, equipment or changing weather

A skim session can still go ahead when conditions or kit are not ideal. Adjust the plan instead of forcing it.

Limited space

On a busy or narrow beach, use a single short lane and strict turn-taking, ride only when the lane is clear, or move further along to a quieter stretch. Shorter glides are still good practice for foot placement and turns.

Limited equipment

With only one or two boards, rotate riders after each run and use waiting time for dry practice. Riders can practise stance, the shoulder turn for spins and small hops on a board laid on dry sand. Dry sand stops the board sliding, so it is a safe place to rehearse movements.

Changing weather and conditions

  • Waves too big or choppy: flatland riding becomes difficult and riskier. Switch to dry-sand practice and games on the beach, or come back at a calmer tide.
  • Wind: strong onshore wind can make the water messy. Look for a more sheltered part of the beach.
  • Cool or cloudy weather: bring warmer layers for between runs and keep the session shorter.
  • Thunder or lightning: leave the beach straight away.
  • Hot sun: plan more shade breaks and drinks, and avoid riding through the hottest part of the day.

Beach safety and respect for other visitors

Safe skimboarding means choosing a clear area, looking after the group and sharing the beach considerately.

  • Follow lifeguard flags and local rules, as some beaches restrict boards in certain zones or at certain times.
  • Never ride towards swimmers, small children, dogs or people walking along the shoreline. Wait until the lane is clear.
  • Keep boards under control and do not let them fly loose across the sand when you fall.
  • Watch out for rocks, shells and sudden changes in the sand, and stay out of deeper water if anyone in the group is a weak swimmer.
  • Keep music low, keep the base camp compact, and take all rubbish home.
  • Stop riding when you are tired, because most falls happen at the end of a long session.

Learning skimboarding tricks in the right order, from a steady glide to turns and then spins, makes progress faster and falls less painful. Combine that progression with a well-chosen beach, a marked lane and a few easy games, and a beginner skim session becomes a sociable day by the sea for the whole group.

Related articles