How to Read Tide Tables, Tide Charts and Current Tables for a Great Day by the Sea

A practical guide to reading tide tables, tide chart numbers and current tables, with UK and Australia tips and tide timing for fishing, kayaking, surfing, boating and group beach days.

15 min readWeather, tides and sea conditions6 viewsHow to Read Tide Tables, Tide Charts and Current Tables for a Great Day by the Sea
— · 0 votes
Contents
  1. What do tide tables, tide charts and current tables actually show?
  2. How to read tide tables step by step
  3. What does chart datum mean, and why do some tide heights look negative?
  4. Why does the time zone matter so much?
  5. What are secondary ports and tidal differences?
  6. How to read tide charts and tide chart numbers
  7. How to read tide and current tables for water movement
  8. How to read tide tables in the UK
  9. How to read tide charts in Australia
  10. Which tide suits fishing, kayaking, surfing and boating?
  11. How to read tide charts for fishing
  12. How to read tide charts for kayaking
  13. How to read tide charts for surfing
  14. How to read tide charts for boating
  15. How to plan a tide-friendly seaside get-together
  16. What to bring
  17. How to organise the group
  18. Tide games and activities for different ages
  19. Tide line race (all ages)
  20. Twelfths relay (ages 10 and up)
  21. Rock pool bingo (younger children)
  22. Low-tide beach games (mixed abilities)
  23. How weather changes the tide picture
  24. Alternatives for poor weather, small beaches or limited kit
  25. Beach safety and respect for other visitors

To read a tide table, find the right local tide station and date. Note the times of high tide and low tide, and read each height in metres (or feet) above chart datum. Then check the time zone, and adjust for daylight saving if the table asks you to. A tide chart shows the same information as a curve, so you can estimate the water level at any hour between high and low. A current table, sometimes called a tidal stream table, tells you which way the water is flowing, how fast it is moving in knots, and when it goes slack. With those three readings you can choose the right window for rock pooling, fishing, paddling or a picnic on wide, firm sand, and plan the walk back before the water returns.

What do tide tables, tide charts and current tables actually show?

Tide tables, tide charts and current tables describe the same tidal cycle in different ways. Tables and charts deal with the vertical movement of the sea, which is how high the water is. Current tables deal with the horizontal movement, which is where the water is going and how fast.

FormatWhat it showsUnitsBest used for
Tide tableTimes and heights of each high tide and low tide for one locationTime (24-hour clock), height in metres or feet above chart datumQuick planning: when the beach is exposed or covered
Tide chart (tide graph or curve)The rise and fall of water as a continuous line through the dayTime on the horizontal axis, tidal height on the vertical axisEstimating the water level at a specific time, such as 11:30
Current table or tidal stream dataDirection and strength of flow, plus times of slack waterSpeed in knots, direction in degrees trueBoating, kayaking, snorkelling and fishing in channels, estuaries and headlands

How to read tide tables step by step

A tide table lists the predicted times and heights of high and low water for a named location, usually two of each per day on most coasts. Follow these steps whenever you plan a beach trip:

  1. Choose the closest local tide station. Tide times can differ by an hour or more along a single stretch of coast. Use the station for your beach, or the nearest one with similar exposure. Avoid one that sits up an estuary when you are on the open coast, or the other way round.
  2. Find the date. Most tables run by month. Each day normally shows four entries, though occasionally there are three, because the tidal cycle is roughly 12 hours 25 minutes long. Tides therefore arrive about 50 minutes later each day, on average.
  3. Read the times. Times are usually on the 24-hour clock, so 14:20 means 2:20 pm.
  4. Check the time zone note. The header or footer states whether times are in standard time or already adjusted for summer or daylight saving time. This is the most common reading mistake. See the time zone section below.
  5. Read the heights. The larger figures are high tides and the smaller figures are low tides. All of them are measured from chart datum, not from the sand you are standing on.
  6. Work out the tidal range. Subtract the low tide height from the next high tide height. A large range means water moves a long way up and down the beach and the flow is stronger. A small range means gentler changes.

What does chart datum mean, and why do some tide heights look negative?

Chart datum is the reference level from which tide heights and charted depths are measured. In the UK and Australia it is generally set close to Lowest Astronomical Tide, the lowest level expected under normal astronomical conditions. US tables use Mean Lower Low Water. A height of 0.4 m means the water is 0.4 metres above that reference. A negative figure, such as -0.2 m, means the water is predicted to fall below chart datum. That happens on some very low tides and usually exposes more rock pools and sandbars than normal.

Charted depth plus tidal height gives the approximate depth of water at that moment. For example, a spot charted at 1.0 m depth will have about 3.5 m of water when the tide height reads 2.5 m.

Why does the time zone matter so much?

Tide tables may print times in local standard time all year, so in summer you may need to add one hour yourself. If you miss this step, you will arrive an hour late for low tide, which is exactly when the water is coming back in. Always read the note at the top of the table. Many apps and websites convert times automatically, but printed booklets often do not.

What are secondary ports and tidal differences?

Some publications give full predictions only for major standard ports. Smaller places, called secondary ports, are listed with time and height differences to apply. For example, a note might read "HW −0:35, height −0.3 m". You would subtract 35 minutes from the standard port's high water time and 0.3 m from its height. Online tide services usually do this sum for you.

How to read tide charts and tide chart numbers

A tide chart is a graph with time along the bottom and tidal height up the side. The peaks of the curve are high tides and the troughs are low tides. To read the water level at any time, go up from that time to the curve, then across to the height scale.

The curve is not a straight line. Water rises and falls slowly near high and low tide and fastest in the middle hours. A handy approximation is the rule of twelfths. It assumes about six hours between low and high water, and that the tide changes by the following fractions of its range in each hour:

  • Hour 1: 1/12 of the range
  • Hour 2: 2/12
  • Hour 3: 3/12
  • Hour 4: 3/12
  • Hour 5: 2/12
  • Hour 6: 1/12

Worked example (illustrative figures): low tide is 1.0 m at 08:00 and high tide is 5.2 m at 14:00. The range is 4.2 m, so one twelfth is 0.35 m. The predicted heights are then:

  • 09:00: about 1.35 m
  • 10:00: about 2.05 m
  • 11:00: about 3.1 m
  • 12:00: about 4.15 m
  • 13:00: about 4.85 m
  • 14:00: 5.2 m

Half the rise happens in the two middle hours. That is why a beach that felt spacious at 09:30 can shrink quickly by 11:30. The rule is a rough guide and works poorly on coasts with unusual tidal patterns. Some areas, for instance, have one tide a day or a long stand at high water.

Tide charts also reveal springs and neaps. Spring tides occur around new and full moon and have the biggest range, with the highest highs and lowest lows. Neap tides fall between them and have the smallest range. A spring low tide is ideal for exploring rock pools. A neap tide gives a calmer, more predictable day on a small beach.

How to read tide and current tables for water movement

A current table shows tidal streams: the predicted direction and speed of the horizontal flow of water caused by the tide. The key entries are:

  • Flood: the stream running in while the tide rises.
  • Ebb: the stream running out while the tide falls.
  • Slack water: the short period when the stream turns and is weakest.
  • Maximum current: the time and speed of the strongest flow, in knots. One knot is one nautical mile per hour, a little over 1.8 km/h.
  • Direction: given in degrees true, as the direction the water flows towards. A stream setting 090° runs east.

Slack water does not always match the time of high or low tide, especially in estuaries and narrow channels. Read current speed and direction from the current table itself rather than guessing from tide times.

On UK nautical charts, tidal stream data often appears as tidal diamonds. These are lettered points linked to a small table that gives direction and rates at springs and neaps for each hour before and after high water at a reference port. Tidal stream atlases present the same idea as arrows on a series of hourly maps.

How to read tide tables in the UK

UK tide tables give heights in metres above chart datum, which is approximately Lowest Astronomical Tide. Many published tables give times in GMT (UTC), so you add one hour during British Summer Time. Check the heading of your source, because some websites and apps show local clock time already.

Tidal ranges vary hugely around Britain and Ireland. Some estuaries and bays have very large spring ranges, while other coasts change only modestly. Do not assume the range you know from one holiday spot applies elsewhere. Use the nearest listed port and read its own spring and neap figures.

How to read tide charts in Australia

Australian tide predictions give heights in metres above chart datum, typically close to Lowest Astronomical Tide at most ports. Official tables often state times in local standard time. In states that use daylight saving, add one hour in summer unless the table says this has already been done. Australia also spans several time zones, so make sure the station you are reading belongs to the same state you are visiting.

Tidal patterns differ around the continent. Some places have two tides a day of similar size, some have two unequal tides, and some northern and western locations have very large ranges. On those coasts, wide tidal flats can flood quickly. Always look at the curve for your specific location rather than a city station hundreds of kilometres away.

Which tide suits fishing, kayaking, surfing and boating?

The best tide depends on the activity. Use the table below as a starting point and confirm it with local knowledge, because headlands, reefs and river mouths change everything.

ActivityWhat to read firstTypical good windowWatch out for
FishingTide chart plus current tableMoving water, often a few hours either side of a high or low tide, depending on the spotRock platforms that flood on the rising tide, and slippery weed
KayakingCurrent table first, then tide timesSlack water for crossings; paddle with the stream, and plan to return when it turns in your favourWind blowing against the stream, which steepens waves; mudflats exposed at low tide that stop you landing
SurfingTide chart, swell and wind forecastVaries by break: many beach breaks are popular around mid-tide, while reefs can be shallow at low tideRip currents, which can strengthen at certain stages of the tide
BoatingTide table heights, chart depths, current tableEnough tidal height over bars and shallows, ideally on a rising tide so a grounding refloatsBar crossings on a strong ebb against swell
Rock pooling and sand gamesTide table low tide time and heightFrom about an hour before low tide until an hour afterGetting cut off on headlands or sandbanks as the flood returns

How to read tide charts for fishing

For fishing, focus on when the water is moving and which way it flows past your spot. Mark the rising and falling stages on the tide chart. Note the times when the curve is steepest, because that is when the flow is strongest. Then check the current table for direction, so you know where to cast and how your bait will drift.

How to read tide charts for kayaking

For kayaking, read the current table before the tide times. Note slack water and maximum current speed in knots. A stream of a couple of knots can equal or exceed the comfortable cruising pace of many recreational paddlers. Plan the outward leg with the stream only if the return will also be favourable or slack, and check that the launch and landing points still have water at your planned time.

How to read tide charts for surfing

For surfing, match the tidal height to the break. Note the height at your planned session time from the chart, then compare it with what locals say works at that beach. Remember that the tidal range on a spring day can turn a mellow break into a shallow, dumping one within a couple of hours.

How to read tide charts for boating

For boating, add the predicted tidal height to the charted depth to find the actual depth, then keep a sensible margin under the hull. Use current tables to time passages through channels and around headlands, and avoid crossing bars when a strong ebb meets incoming swell.

How to plan a tide-friendly seaside get-together

A tide-planned beach day suits families with young children, groups of friends, school or club outings, and anyone who wants more sand, more rock pools and fewer surprises. Building the day around the tide table means you arrive when the beach is at its best and leave before space disappears.

What to bring

  • A printed or screenshotted tide table and tide chart for the right station, with times already adjusted for daylight saving
  • A watch or phone alarm set for the turn of the tide
  • Water shoes or old trainers for rocks
  • Buckets, a magnifier and an identification card for rock pooling
  • A frisbee, a soft ball, a rope for tug of war, and sticks or flags for marking
  • Sun protection, warm layers, water, snacks and a small first-aid kit
  • A windbreak or a small shelter for changeable weather
  • A bag for taking home all rubbish

How to organise the group

  1. Pick the window. For sand games and rock pooling, arrive about one to two hours before low tide. That gives you the falling tide, the low, and some time on the early flood.
  2. Appoint a tide keeper. One adult or confident teenager tracks the time, watches the water line and calls the "pack up and move back" moment.
  3. Set a base camp above the high tide line. Look for the line of dry seaweed and debris, and put bags and picnic blankets there.
  4. Agree a regroup signal and time. Settle on a whistle, a flag or a set time, such as 30 minutes after low tide.
  5. Plan the walk back. If you go round a point or onto a sandbank, agree the latest time to turn back. Make it well before the water reaches the access route.

Tide games and activities for different ages

Tide games turn reading the table into part of the fun, and they help everyone notice how quickly the sea moves.

Tide line race (all ages)

Rules: At the start of the rising tide, each player pushes a marked stick into the sand where they predict the water's edge will reach in 30 minutes. When time is up, the closest stick wins. Younger children can use coloured flags and just guess. Older players can use the tide chart and the rule of twelfths to justify their guess.

Twelfths relay (ages 10 and up)

Rules: Teams get a mock tide table with a low and high tide. For each hour, one runner works out the predicted height and sprints to place a marker on a measured "height ladder" drawn in the sand. The first team with all six correct markers wins. For limited space, play seated with pebbles on a drawn graph.

Rock pool bingo (younger children)

Rules: Give each child a card with pictures such as crab, anemone, snail, seaweed and shell. They tick items they spot, but they look and do not take. Pair small children with an adult and keep to pools near the base camp.

Low-tide beach games (mixed abilities)

Firm sand at low tide is perfect for a drawn obstacle course, beach cricket or rounders, frisbee, or a sand-sculpture contest. Mark the pitch well away from fishers and other groups. For players with limited mobility, set up nearer the access path and choose stationary games such as target throwing or sculpture judging.

How weather changes the tide picture

Tide tables are astronomical predictions, and the weather can make the real water level higher or lower. Low air pressure tends to raise sea level, roughly 1 cm for each hectopascal below average. Strong onshore winds can push water higher up the beach, and storm surges can add much more. High pressure and offshore winds can make tides lower than predicted. On wild days, treat the predicted high tide as a minimum, keep base camp higher, and check local warnings.

Alternatives for poor weather, small beaches or limited kit

  • Rain or wind: shift to a sheltered harbour wall or promenade and watch the water rise against marked steps or posts, comparing it with the tide chart.
  • Small beach at high tide: switch to seated games such as pebble tide graphs, beachcombing along the strandline or a sketching challenge.
  • No equipment: use driftwood as markers, shells as counters and footprints as a measuring tape.
  • Big waves or strong wind: keep everyone out of the water and away from rock edges; enjoy the view from a safe distance.

Beach safety and respect for other visitors

Good tide reading is mainly about staying safe. Keep these points in mind:

  • Know when the tide turns and how fast it rises, especially on wide, flat beaches where water can advance quickly across the sand.
  • Never rely on one exit from a cove, sandbank or rock platform. Turn back with plenty of time to spare.
  • Swim at patrolled beaches between the flags where available, and learn to spot rip currents.
  • Watch children closely near rock pools, slippery weed and incoming water.
  • Return turned rocks gently, leave creatures in their pools, and do not take living things home.
  • Give anglers, surfers and launching boats plenty of room, and keep games and music considerate.
  • Take all rubbish with you, including fishing line and food scraps.

Once you know how to read tide tables, tide charts and current tables, a beach day stops being a guess. Check the station, the date, the time zone and the heights, then glance at the current table if you are going on the water. Pick the window that suits your group and enjoy the sea at its best.