How to Store a Skimboard Properly

Learn how to store a skimboard properly: rinse off sand and salt, dry it fully, keep it flat or hanging on a rack, and shield it from sun and heat.

3 min read0 views
— · 0 votes
Contents
  1. Rinse sand and salt before storing
  2. Keep the board flat or on a rack
  3. Shield the board from sun and heat
  4. Skimboard Storage Questions
  5. Where should I keep my skimboard in the off-season?
  6. Can I hang a skimboard on the wall?
  7. How do I stop a skimboard from warping?
  8. Should I rinse my skimboard before putting it away?

Storing a skimboard properly means cleaning off salt and sand, drying the board completely, and then keeping it flat or hanging on a rack away from sun and heat. A skimboard is a thin composite panel, and how you rest it between sessions decides whether it stays true or slowly warps. The steps below cover everyday storage at home and the longer off-season stretch.

Rinse sand and salt before storing

Rinsing sand off before storing protects both the board surface and the edges from grit and dried salt. Fresh water and a soft cloth lift sand without scratching the finish, and a light wipe of the rails clears salt that cakes in the seams. Skip harsh cleaners and abrasive pads, which dull the coating and open the laminate to water. Let the board air dry fully before it goes anywhere near a bag or a rack.

Keep the board flat or on a rack

Keeping a skimboard flat spreads its weight evenly and is the surest way of avoiding warping over months. Lay it on a clean, level shelf or slide it into a skimboard storage rack built for flat panels. Wall hanging works well in a garage or shed, provided the supports sit under the board rather than pinching the middle. Never lean a board against a wall for long, because a single contact point bends the panel.

Shield the board from sun and heat

Sun and heat exposure softens the resin and foam core inside a skimboard, and a hot board left to sag takes a set. Dry storage in a shaded garage, closet or shed keeps the board cool and out of direct light. If the board must sit outdoors, cover it loosely so air still moves around it. High heat inside a car or a metal box is the condition to avoid entirely.

Skimboard Storage Questions

Where should I keep my skimboard in the off-season?

Off-season storage should be dry, shaded and flat, such as a shelf in a garage or a closet indoors. Clean the board and dry it fully before it goes into storage, then rest it flat or hang it on a rack. Check it once in a while for dust and moisture, and keep it away from heaters and sunny windows.

Can I hang a skimboard on the wall?

Yes, wall hanging is fine for a skimboard as long as the board rests on supports that carry it evenly. Use a rack or two padded hooks placed so the panel stays flat rather than bowing between them. Hang it in a spot out of direct sun so heat does not soften the board. A wall mount also keeps the board off the floor and away from damp.

How do I stop a skimboard from warping?

Avoiding warping comes down to support and temperature, so store the board flat or on a rack and keep it cool. A board left leaning on a wall or resting on one end bends under its own weight over time. Heat makes the panel softer and more willing to take a set, so shade matters as much as support. Rinse and dry the board first, since trapped moisture can also disturb the laminate.

Should I rinse my skimboard before putting it away?

Yes, rinsing sand off before storing is worth the minute it takes and protects the finish. Salt left on the rails and surface draws moisture and grit that wear the board down between sessions. Use fresh water and a soft cloth, then let the board dry completely before storage. A dry board in dry storage is the goal every time.

Latest articles